Screws etc for the VIC20


Click on the product thumbnail for an enlarged view.

Commodore 64 Breadbin Case Screw 6.6mm head - New

New Breadbin C64 / VIC20 / C16 Case / Keyboard Screw (6.6mm head, 3.5mm diameter thread)

  • For the outer case and inside to attach the keyboard to the upper section.
  • Note: Sometimes the narrow types were used instead - it seems completely random.
  • These are brand new replacements - same dimensions as originals.
  • Sold individually.
Price: £ 0.12   Add to cart. (59 in stock)
Commodore 64 etc Motherboard screw - New

C64 (mainly breadbin), VIC20, C16 and Plus4 motherboard screw - New

  • The breadbin used 7 of these screws for attaching the motherboard to the lower case. 
  • Also used for fixing the motherboard to the case in the later clip-together type C64C case (ie: those without metal keyboard brackets)
  • Also used in the VIC20, C16 and Plus4
  • Sold individually.
Price: £ 0.06   Add to cart. (70 in stock)
Commodore 64 etc Narrow Case / Keyboard Screw - New

C64 narrow screw (breadbin case and keyboard)  - New

  • For breadbin C64s that used narrower (5.5mm diameter head) screws
  • Where used, 3 hold the case together, and 8 fix the keyboard to the upper case
  • Also used in the VIC20 (sometimes the wider types were used instead - seems to be completely random)
  • Brand new replacement screws, sold individually.
Price: £ 0.07   Add to cart. (84 in stock)
Heatsink assembly for early VIC20

Heatsink assembly for early VIC20

  • Original salvaged parts in good condition
  • Includes the 3 black metal fittings, 2 insulating tabs, screws with associated nuts and washers
  • For the original (wide) VIC20 board which has a 2-pin AC power connector
Price: £ 5.95   Add to cart. (out of stock)
Main badge for VIC20

Main badge for VIC20 *Original metal badge*

  • The VIC20 had various badge designs. Those sold here read "C= Commodore VIC20" as shown in photo.
  • Very good condition - no chips or major scratches
  • Size is 110.0 x 10.6mm - please check your case as the recess can vary.
  • Clean and in very good condition. Old adhesive removed and fresh double sided tape applied, ready to peel for attachment.
Price: £ 7.99   Add to cart. (out of stock)
Serial Number Foil Sticker for VIC20

Original Serial Number Sticker for VIC20 - "Made In England" types

  • Original Metail foil serial number labels, cleanly removed from old VIC20 cases.
  • In good condition  - may have wrinkles but not torn or dog-eared.
  • Fresh double-sided tape attached ready to peel and apply.
  • The following serial numbers are available - if you require a specific serial number from the list below, please state which in the Special Instructions box during checkout. If nothing is specified, I'll select one at random.
  • Currently available:  UKB318108
Price: £ 2.50   Add to cart. (out of stock)
VIC20 early style side port panel

VIC20 early style side port panel

  • For VIC20s that have a 2-pin power socket.
  • Note the socket is attached (desoldered from the choke) due to the difficulty in removing it.
  • Good conditon - All text intact
  • Screws are supplied
Price: £ 6.50   Add to cart. (1 in stock)